• Alternators are made in MS Body (10 times better than Alumium body).
• We use 100% Pure Copper(Insulation H Class) only which prevents from burning.
• We use 100% genuine SKF or NBC bearing only which creates loss of failures in Alternators.

SINGLE PHASE. 230V. 50 Hz. 1.0Pf. 1500RPM
Technical Specification
KVA	KW	Suitable Load (H.P)	AMP	Required Engine (H.P)
2	2	0.5	8	3.5
3	3	1	12	5
4	4	1.	16	6.5
5	5	2	21	8
6	6	3	24	10
7	7	4	28	12
9	9	5	36	14
10	10	6	40	15
12	12	7	48	20
15	15	10	60	24
20	20	12	80	28
25	25	15	100	35
30	30	20	120	42

THREE PHASE, 415V, 50 Hz, 0.8Pf, 1500RPM
Technical Specification
KVA	KW	Suitable Load (H.P)	AMP	Required Engine (H.P)
6	5	3	8	8
7	6	4	10	10
8	7	5	12	12
10	8	6	14	14
12	10	7	17	15
15	12	10	21	20
20	16	12	28	28
25	20	15	35	32
30	24	20	42	40
35	28	22	49	50
40	32	25	54	55
50	40	35	66	72
62	50	42	84	95
75	60	52	97	112
82	66	60	107	125
100	80	75	130	142

PRODUCT SPECIALITIES :

Construction :

• Generators are available in rotating field, self excited and self regulated in Brushless and compounding system.
• The stator frame is of rolled steel with welded feet.
• Rotor core is made up of cold rolled sheets held under pressure on the grounded steel shaft.
• End shields are of cast iron construction.
• Stator is skewed for better waveform.
• Continuous damper winding fitted on poles.

Electrical performance :

• Bridge rectifier.
• Good overload characteristic.
• Can generate electricity in both directions.
• Voltage regulation within +-5% for compounding system and +-1% in Brushless version.
• Voltage adjustment range is +-5% of nominal voltage.
• Epoxy gel coating on windings after varnish for resistance against moisture.
• Good motor starting capability, the compounding system giving 2.5 to 3 times of full load capability for short duration.
• Positive voltages build up from residual magnetism.
• Sustained short circuit current in the order of 3 times of full load current.
• Voltage dips on application on full load 0.8pf on the order of 10% to 15%